Flipsky VX3 Pro 2.4GHz Wireless Module Waterproof Underwater Remote Controller With Receiver For Efoil/Esurf/ESK8 Skateboard

Description

Flipsky VX3 Pro 2.4GHz Wireless Module Waterproof Underwater Remote Controller For Efoil/Esurf/ESK8 Skateboard

Specification:
– 1.8-inch super clear and big screen display
– Display shows more: Except for basic telemetry data, it also display GPS, motor power, real-time temperature of MOS tube, and throttle progress bar information
– Be compatible with Flipsky FSESC/FTESC and other VESCs and Non-VESCs
– ESK8 mode / E-surf mode switching freely
– Esurf mode：Cruise speed control function
– Waterproof IP rating: IP67
– Bigger remote battery capacity:1500MA
– ESC failure report ：Detect possible failures of the ESC in time for replacing
– Controller mode: PPM/UART
– Charging way:Wireless Magnetic Charging
– VX3 Pro Remote comes with Receiver (support Flipsky non-vescs)
– Support online upgrade firmware

Feature:
1. Replace the communication module with SX1280;
2. The transmitter microcontroller is replaced with GD32F303CGT6;
3. Add FTESC ESC UART control protocol;
4. Add UART, PPM, UART&PPM control modes;
5. Function switching is changed to joystick up and down switching control;
6. Add gear lock function;
7. Add low battery alarm function for skateboards and surfboards;
8. Add total mileage display function;
9. The maximum wheel diameter can be set to 999mm;
10. Add the function of modifying the default gear at startup;
11. Add whether the cruise mode/reverse function is turned on and can be modified;
12. The maximum number of wheel gears can be set to 999mm;
13. Optimize the screen refresh frame rate and faster data refresh display.

Package Included:
1 set x Remote Controller

1 x Receiver