Notice: This product support betaflight and inavflight.
Descriptions:
Compared to the previous F745 AIO, the F405 AIO offers enhanced performance with a continuous 40A current rating and a peak current of 45A (10s). It is compatible with 2-4′ and ultra-lightweight 5′ FPV builds and supports 1002-2104 brushless motors. Pre-flashed with Bluejay firmware, it supports bidirectional Dshot, includes dual CNC heat sinks, onboard TVS diodes, and is equipped with low-ESR high-frequency electrolytic capacitors.
Features:
1. Wireless Tuning 2.0 Upgrade: Supports Meteor LED strip function, allowing for custom your own cool styles.
2. Wireless BOOT Button: With the APP’s DFU button, the flight controller can enter DFU mode without pressing a physical button, eliminating the hassle of disassembling when it cannot automatically boot.
3. Full Feature Tuning: Supports APP-based parameter tuning, firmware upgrades, and wireless motor direction adjustment.
4. Equipped with ICM-42688 Gyroscope: Features independent LDO power supply, a PSRR (Power Supply Rejection Ratio) of up to 100dB, and output ripple as low as 1.3mV! This greatly improves gyroscope measurement accuracy and enhances flight stability.
5. STM32F405 MCU: Offers better performance than the F411 and greater compatibility compared to the G4 series. (SpeedyBee F405 AIO supports both Betaflight and INAVFlight).A higher frequency means stronger performance, larger flash memory, and greater compatibility for program functionalities.
– STM32F405: 168MHz Frequency, 1MB Flash
– STM32F411: 100MHz Frequency, 512KB Flash
– STM32G474: 170MHz Frequency, 512KB Flash
6. Equipped with the New SPA06-003 Barometer: Further improves accuracy, with barometric pressure measurement accuracy increased to 0.5%, and relative pressure accuracy improved to ±0.03hPa, equivalent to ±0.25m.
FC Specifications:
|
Product Name: |
SpeedyBee F405 AIO Flight Controller |
|
MCU: |
STM32F405 |
|
Gyro: |
ICM-42688P |
|
USB Port Type: |
Type-C |
|
Barometer: |
SPA06-003 |
|
OSD: |
Supported |
|
Bluetooth BLE: |
Supported, Bluetooth speed enhancement – 2.0 |
|
Wireless Flight Controller Firmware Update: |
Supported (no need to press physical BOOT button) |
|
Wireless Download & Black Box Analysis: Not supported DJI Air Unit Connection Method: |
Supports both 6-pin direct insertion and soldering |
|
6-pin DJI Sky Port Direct Insertion: |
Supported, can directly connect to DJI O3/RunCam Link/Caddx Vista without changing wire order |
|
Flash (for BlackBox): |
8MB |
|
Betaflight CC Pads (Camera Parameter Adjustment): |
Supported |
|
Input Voltage: |
3S-6S LiPo battery |
|
4V5 Output: |
Two 4V5 outputs; total current 1A |
|
5V BEC Output: |
Three 5V outputs; total current 2A; shared with 4V5 |
|
9V BEC Output: |
None (comes with an external BEC module, can switch between 5V and 9V); total current output 2A |
|
MOTOR: |
M1-M4 |
|
UART: |
4 full-function serial ports (UART3, UART4, UART5, UART6+SBUS[R2]) |