CYCLONE ELRS 2.4GHz 7CH PWM RX Receiver CRSF Protocol for RC FPV Racing Drones

Description

CYCLONE ELRS 2.4GHz 7CH PWM RX Receiver CRSF Protocol for RC FPV Racing Drone

Description:

Item: ELRS 2.4G PWM7 RX

Firmware Name: DIY_2400_RX_PWMPEXAntenna: IPEX MHF+T antenna/copper tube antennaMicrocontroller chip: ESP8285RF chip: SX1280/SX1281Return power: 12.5dbm/17mWFirmware version: ExpressLRS V3.2Circuit board size: 18.5mm * 26mmWeight: 3.5gNumber of channels: 7CHWorking voltage: 4~6 VProtocol: PWM/CRSF switchable

7-channel full scale ELRS 2.4G receiverSwitchable CRSF bus mode without firmware reset

Note: Factory firmware 3.2.0. If your tuner firmware is lower than version 3.0, it is recommended to update to 3.2.0. You can use 7 PWM full scale channels, while 2. x only has 4 full scale channels

PWM 6CH/7CH CRSF switching does not require firmware reset, and can be easily switched as follows

1. Turn on the receiver WI-FI network, 

    1) Activate receiver WI-FI using the transmitter Lua menu when connected to the high-frequency head

    2) If the high-frequency head is not connected, power on and wait for one minute, and the receiver will automatically enter WI-FI

2. Computer or mobile search for WIFI   

    WIFI hotspot name: ExpressLRS RX   

    Connection password (note all lowercase passwords): expresslrs

3. Browser Open http://10.0.0.1/hardware.html. 

4. Enter the ELRS hardware configuration page to import the hardware configuration file (note: do not modify it yourself until you fully understand the meaning of each parameter). 

5. Import the configuration file we provide, PWM 7CH or CRSF, then click the button at the bottom of the page and wait for the receiver to restart itself. 

Information:https://pan.baidu.com/s/1AakcfkzCgXW3d56nPv2j-A?pwd=1234Package Included: 

1x ELRS 2.4G PWM7 RX Receiver

1x Copper tube antenna

1x Even level sub T-shaped antenna x 1