1. Advanced Processor and ESC Integration: Includes the powerful F722 FC and 128KHz BL32 50A ESCs, providing exceptional performance and control for all types of drones. This stack is engineered to support up to 8 motors, ensuring smooth and precise operations even in demanding environments.
2. Faster Wireless Firmware Flashing: Integrated Bluetooth/WiFi chip allows for wireless firmware flashing, making updates 33% faster compared to traditional methods. Fully compatible with Betaflight configurations, this allows seamless operation and swift adjustments using a smartphone.
3. Comprehensive Connectivity: Equipped with solder-free plugs for digital video transmitters, receivers, cameras, VTX, GPS, and LED strips, simplifying the build process and reducing setup time. Just plug and play to get your drone operational in no time.
4. Enhanced Onboard Data Storage: This unit comes with a massive 500MB Blackbox flash memory, capable of storing extensive flight data. Easily retrieve comprehensive flight logs wirelessly in just one minute, aiding in thorough analysis and optimization.
5. Advanced Motor and Light Control: Provides wireless motor direction changes for BLHeli32/BLHeli_S/BlueJay ESCs via the SpeedyBee app, allowing users to fine-tune motor configurations effortlessly. The board includes 4-level battery life indicators and built-in LED plugs with quick mode switching via a boot button.
Specifications:
Product Name
SpeedyBee F7V3 Flight Controller
MCU
STM32F722
IMU(Gyro)
BMI270
USB Port Type
Type-C
Barometer
BMP280
OSD Chip
AT7456E chip
BLE Bluetooth
Supported. Used for Flight Controller configuration,built-in a single 2.4 GHz Wi-Fi-and-Bluetooth combo chip
Flash FC Firmware Wirelessly
Supported. Please enter MENU{>} FC Firmware Flasher
Download/Analyze Blackbox
Supported.Please enter MENU {>}Blackbox Analyzer
DJI Air Unit Connection Way
Two ways supported: 6-pin connector or direct soldering.
6-pin DJI Air Unit Plug
Supported. Completely compatible with DJI O3/RunCam Link/Caddx Vista/DJI Air
Unit V1, no wire is needed to be changed.
Flash(for BlackBox)
500MB
BetaFlight Camera Control Pad
Yes(CC pad on the front side)
Power Input
3S – 6S Lipo
5V Output
10 groups of 5V output, three +5V pads and 1 BZ+ pad( used for Buzzer) on front side, and 6 +5V output included in the connectors on bottom side. The total current load is 2A.
9V Output
2 groups of 9V output, one +9V pad on front side and other included in a connector on bottom side. The total current load is 4A.
3.3V Output
Supported. Designed for 3.3V-input receivers. Up to 500mA current load.
4.5V Output
Supported. Designed for receiver and GPS module even when the FC is powered through the USB port. Up to 1A current load.
Supported.SDA & SCL pads on front side. Used for magnetometer, sonar, etc.
LED Pad
Used for WS2812 LED controlled by Betaflight firmware.
Buzzer
BZ+ and BZ- pad used for 5V Buzzer
BOOT Button
Supported.
[A]. Press and hold BOOT button and power the FC on at the same time will force the FC to enter DFU mode, this is for firmware flashing when the FC gets bricked.
[B]. When the FC is powered on and in standby mode, the BOOT button can be used to controller the LED strips connected to LED1-LED4 connectors on the bottom side.By default, short-press the BOOT button to cycle the LED displaying mode. Long-press the BOOT button to switch between SpeedyBee-LED mode and BF-LED mode. Under BF-LED mode, all the LED1-LED4 strips will be controlled by Betaflight firmware.
