DarwinFPV 22.8V 650mAh 120C 6S LiPo Battery XT30 Plug for Darwinfpv BabyApe 6S RC Drone FPV

Description

Notice: This product is a lithium battery, which needs to be charged before it can be used after receiving the battery. When using it, you must remember to set the battery low voltage reminder on the ground station. It is recommended that the minimum voltage should not be less than 3.5. The battery will be completely destroyed if it is over-discharged once.

Specifications:

Battery Type : LiPo
Capacity :650mAh
Voltage :22.8V
Net Weight : 100g
Size(L*W*H):65*31*31mm
Assemble :6S1P
Discharge Rate : 120C
Charge Rate : 1C to 5C
Charge Connector: XH-JST 7P
Discharge Connector : XT30

Note: Due to the difference between the measurement, the battery dimension and weight may have little error.

Caution:

Don’t over-charge, or over-discharge batteries.
Don’t put it beside the high temperature condition.
Don’t throw it into fire.
Don’t throw it into water.

Package Included:

1x DarwinFPV 22.8V 650mAh 120C 6S LiPo Battery